We had the opportunity to test out Rillpac BT10 Bluetooth earphones. The whole unboxing experience was similar as our previously tested Rillpac BT30. After opening the box we found the earphone itself along with a really nice hard case, also all the extra earbuds in different sizes, and charging USB cable. Connecting to the earphone was really simple. Just press and hold for a few seconds of the MFB (multifunction button), a nice woman voice telling us that the device is on and ready to connect. Select Rillpac BT10 from your phone Bluetooth settings and you are ready to roll.
The charging time takes ~1,5 hours. During our testing, we found out it is possible to use it ~5-6 hours (depends on the volume level) which is plenty enough for a whole work day of use. As for sound quality, highs are decent, lows are acceptable from this size of earphones, mids are a little bit weak, but still ok. The cable length is enough (~0,7cm) even for those who have a large head. Overall we are really happy with the build and sound quality. As we expected Rillpac is really aware of building quality products and we are not disappointed with Rillpac BT10 as well.
Also, you can check our unboxing video here!
You can check for more Rillpac products and news on their Social sites:
The product can be purchased in the following stores:
|Bluetooth Chip set:||AIROHA AB1512|
|Bluetooth working range:||Max 10 meters|
|Audio output sensitivity:||SBC|
|Audio output sensitivity:||500mV(max)output 0dB,(play 0dB)|
|Working current:||about 18mA|
|Battery capacity:||90mAH 3.7V|
|Low voltage indication:||3.3V|
|Working time:||Max 6 hours|
|Standby time:||200 hours|
|Charging time:||1.5 hours|